Replace Fluorescent Light Fixture In Kitchen – This past week has been full of showhouse and children’s hospital projects, but we’ve also managed to knock three more bullets off our kitchen to-do list. We (1) patched, primed, painted an old yellowing ceiling, (2) replaced two fluorescent lamps in the kitchen area, and (3) replaced the light over the breakfast table. So let’s kick things off with our new favorite view
Each light installation has a bit of its own peculiarities, so I will dive into the people before the details of work that goes into the ceiling. When it comes to replacing large fluorescent lights, many of you ask for a step-by-step overview (so you can cope with one of these animals at home) and the good news is that it’s actually quite simple. First, I snapped out of the plastic cover and twisted two tubes of light.
Replacing fluorescent lamps does not require electricity. Follow these steps.
Materials and tools:
Medium and large flat head screwdriver
Needle-nose pliers to bend and shape cable
Drill and bit
Toggle bolt or wooden screw
Delete an existing light
Turn off the power in the circuit breaker box.
Remove the lens panel or diffuser from the light.
Remove a lamp or light.
Remove the ballast cover. Observe how the cables are connected for future reference.
Uncap black and white cables and test to ensure that power is off.
The cable is separate from an existing schedule.
Remove the basic fixture from the ceiling.
Install new fixture
Remove the ballast cover from the new basic fixture.
Removes the knock-out center to allow the cable to go through the base.
The base position of the fixture at the desired point on the ceiling.
Use a tape measure to ensure that the base parallels to the wall, and then marks the position of the mounting hole.
Wearing the safety glasses, take the fixture down and, using the sign for reference, drill the hole to fix the fixture to the ceiling. If you experience resistance when drilling passes through the ceiling drywall, crosslinks are present and wood screws are required. If no cross beams are available, use a toggle bolt. If bolt switching is required, Use a screwdriver to expand the mounting hole enough to allow the toggle bolt to pass through.
Place the bolt mounting hole and attach the lever on the back side.
Pushing the lever through the installation of the hole and safe by screwing the place.
Make an electrical connection by connecting the black supply wire to the wire fixture black and white supply the wire to the white fixture wire. Close the connection with the wire nuts, and attach the wire (bare) ground fixture base.
Install the ballast cover.
Install lights or lights.
Install the fixture cover.
Turn the power back on the circuit breaker box.
Replace Fluorescent Light Fixture In Kitchen